Skip to main content

Procedure for Blow Down a Boiler Gauge Glass?

  1. Close the water and steam cocks on the gauge glass and open the drain.
  2. Then open the steam cock-a strong jet if steam should be seen from the drain.
  3. Close the steam cock.
  4. Open the water cock-a strong jet of water should be observed from the drain.
  5. Close the water cock and then close the drain.
  6. Then open the water cock, the water will rise in the gauge above the normal level.
  7. Then open the stem cock, the water should then settle down, finding its correct level.

Labels:

Comments

  1. Anonymous10 September 2023 at 21:05

    inflatable tent are a game-changer for camping enthusiasts like me! They offer the perfect blend of convenience and comfort. No more struggling with traditional tent poles; just pump it up, and you're ready to go. Plus, the stability and durability of these tents are impressive. I've used mine in various weather conditions, and it has never let me down. It's safe to say that inflatable tents have revolutionized the way I experience the great outdoors.

    ReplyDelete
  2. Alia parker27 September 2023 at 13:09

    The portable washing machine, a miniature marvel, turns any corner of the world into your personal laundry room, granting cleanliness and convenience on your adventures, one spin at a time.




    ReplyDelete

Post a Comment

Popular posts from this blog

Difference Between A, B & C-Class Divisions?

IMO Symbol A Class Division  IMO Symbol B Class Division  SOLAS has tables for structural fire protection requirement of bulkheads and decks. The requirements depend on the spaces in question and are different for passenger ships and cargo ships. The Administration has required a test of a prototype bulkhead or deck in accordance with the Fire Test Procedures Code to ensure that it meets the above requirements for integrity and temperature rise. Types of Divisions: "A" Class "B" Class "C" Class "A" Class: "A" class divisions are those divisions formed by bulkheads and decks which comply with the following criteria: They are constructed of steel or equivalent material They are suitably stiffened They are constructed as to be capable of preventing the passage of smoke and flame to the end of the one-hour standard fire test. they are insulated with approved non-combustible materials such that the average tempera
14 comments
Read more

Bilge Injection Valve

Bilge Injection is a valve that enables the engine room bilges to be pumped out directly overboard in the event of an emergency such as flooding. The valve is normally fitted to the end of a branch connection with the main sea water suction line. This enables large main seawater cooling pumps to be used as a bilge pump in an emergency. Emergencies like fire and flooding involve the use of seawater. If there is a fire, seawater is the biggest resource of water available in the sea. Similarly, if it involves flooding of the engine room, cargo spaces or any other place on the ship for that matter; you would again require pumping the sea water out of the ship. In both these cases, you require pumps.  There are two valves in close proximity namely main injection valve and bilge injection valve. Both of them have their own independent controls. The diameter of the bilge injection valve is kept nearly 66% of the main valve diameter which draws water directly from the sea through the
Post a Comment
Read more

Load Line & Why it is Important

Merchant ships have a marking on their hull know as the Plimsoll line or the Plimsoll mark, which indicates the limit until which ships can be loaded with enough cargo, internationally, the Plimsoll line on a ship is officially referred to as the international load line. Every type of ship has a different level of floating and the Plimsoll line on a ship generally varies from one vessel to another.  All vessels of 24 meters and more are required to have this Load line marking at the centre position of the length of summer load water line. There are two types of Load line markings:- Standard Load Line marking – This is applicable to all types of vessels. Timber Load Line Markings – This is applicable to vessels carrying timber cargo. These marks shall be punched on the surface of the hull making it visible even if the ship side paint fades out. The marks shall again be painted with white or yellow colour on a dark background/black on a light background.  The comp
15 comments
Read more