Skip to main content

MEO Class 1

  • Latest development in IMO
  • Latest development in IACS
  • history of IACS
  • Engine fore end vibrations. Outing C/E says this problem from last 3 months, what will you check.
  • Anchor not heaving up, what will you do as C/E
  • M/E T/c what is VTI
  • Theory how it operates and how will you do it. 
  • EIAPP certificate who issues and what are its contents.
  • Taking over a new ship in the yard. For endurance trials, what all checks you will carry out on M/E. 
  • Noise survey who carried out and when
  • Solas ch xii reg 12,13
  • ESP what to check after the ship passes more than 10 years 
  • MS act national shipping board
  • conflict of law
  • CLT and ducted propellor design and function difference
  • HV system, the isolation process
  • London dumping convention
  • Marine insurance principles and implied assurance
  • Organisational Behaviour
  • How many titles and articles in MLC 2006? What is article V in MLC 2006?
  • How to get MLC certification for a new ship? Documents in MLC.
  • What is CBA?
  • Parametric rolling?
  • Derating purpose.
  • Amendments to ISM code in chronological order? When ISM came into force?
  • Write Class notations of your ships and explain.
  • Role of average adjuster...he wants to hear the proximate cause, particular and general average 
  • What are sea areas ?..told him as per IMO A 801(19) definitions
  • GMDSS equipment and explain each?
  • In ISO 8217: 2017, what all new changes as from previous 2012?....he wants CIMAC guidelines all 8 points.
  • Leadership and managerial qualities of CE?
  •  Statutory certificates on your ship.
  • Join as c/e how you make sure that ism is effectively maintained.
  • Cross curve of stability.? Difference between GZ and KN curve?
  • Dynamic stability?
  • What all test for dynamic stability.
  • Drydock planing?  some line drawing, from where you will come to know what steel n how much steel u need for plate removal.
  • Role of an average adjuster.
  • CSR .. all points..and about all 3forms..?
  • Loss ratio,?
  • What is the commercial point of view for liner trade?
  • Hay Visby and Hamburg rule
  • The aspect ratio for vgt?
  • How you check competency of a TME?
  • No more favourable treatment.. what if you r going to country who did not ratify any convention..can they inspect you.?.what if Ur state doesn't ratify but u r complying with the convention .what proof u will  have that u r complying with new convention .


Labels:

Comments

Post a Comment

Popular posts from this blog

Difference Between A, B & C-Class Divisions?

IMO Symbol A Class Division  IMO Symbol B Class Division  SOLAS has tables for structural fire protection requirement of bulkheads and decks. The requirements depend on the spaces in question and are different for passenger ships and cargo ships. The Administration has required a test of a prototype bulkhead or deck in accordance with the Fire Test Procedures Code to ensure that it meets the above requirements for integrity and temperature rise. Types of Divisions: "A" Class "B" Class "C" Class "A" Class: "A" class divisions are those divisions formed by bulkheads and decks which comply with the following criteria: They are constructed of steel or equivalent material They are suitably stiffened They are constructed as to be capable of preventing the passage of smoke and flame to the end of the one-hour standard fire test. they are insulated with approved non-combustible materials such that the average tempera
14 comments
Read more

Bilge Injection Valve

Bilge Injection is a valve that enables the engine room bilges to be pumped out directly overboard in the event of an emergency such as flooding. The valve is normally fitted to the end of a branch connection with the main sea water suction line. This enables large main seawater cooling pumps to be used as a bilge pump in an emergency. Emergencies like fire and flooding involve the use of seawater. If there is a fire, seawater is the biggest resource of water available in the sea. Similarly, if it involves flooding of the engine room, cargo spaces or any other place on the ship for that matter; you would again require pumping the sea water out of the ship. In both these cases, you require pumps.  There are two valves in close proximity namely main injection valve and bilge injection valve. Both of them have their own independent controls. The diameter of the bilge injection valve is kept nearly 66% of the main valve diameter which draws water directly from the sea through the
Post a Comment
Read more

Load Line & Why it is Important

Merchant ships have a marking on their hull know as the Plimsoll line or the Plimsoll mark, which indicates the limit until which ships can be loaded with enough cargo, internationally, the Plimsoll line on a ship is officially referred to as the international load line. Every type of ship has a different level of floating and the Plimsoll line on a ship generally varies from one vessel to another.  All vessels of 24 meters and more are required to have this Load line marking at the centre position of the length of summer load water line. There are two types of Load line markings:- Standard Load Line marking – This is applicable to all types of vessels. Timber Load Line Markings – This is applicable to vessels carrying timber cargo. These marks shall be punched on the surface of the hull making it visible even if the ship side paint fades out. The marks shall again be painted with white or yellow colour on a dark background/black on a light background.  The comp
15 comments
Read more