Procedure for of online written and oral seat booking by Candidates

Step 1: Login to account using e-Pariksha Login credentials

Step 2: Click on “booking” tab then select “List” sub-tab, click on “Book” button for any written function

Step 3: On clicking the “Book” link, below window will appear
Step 4: Select “Single” if you want to book the paper which you clicked or Select “Multiple” to book multiple Papers.
Note: You have to complete the booking within 10 minutes.

Booking single paper
If you select “Single” the following screen will appear.

Step 5: Click on the “Select” slot. The Available slots will be displayed as shown below.

Step 6: After selecting a slot, click on “Book” button to provisionally block the seat.

When you click on “Book” the following screen will appear.

To see the booking details again, click on the “Booked” link. The following screen will appear

Step 7: Click on “Proceed To Payment” for fee payment

Step 8: On clicking the “Pay” button, you will be redirected to payment gateway.
Note: If the payment fails due to some reason, the seat which is booked will be released after 10 minutes and you will be able to book again.

Booking multiple paper
If you select “Multiple” the following screen will appear.

Step 5: Click on the “Select” slot. The Available slots will be displayed as shown below. Click on the “Book” button to provisionally block the seat.

Step 6: Similarly book the required papers.

To see the booking details again, click on the “Booked” link. The following screen will appear

Step 7: Click on “Proceed To Payment” for fee payment.

Step 8: On clicking the “Pay” button, you will be redirected to payment gateway.
Note: If the payment fails due to some reason, the seats which are booked will be released after 10 minutes and you will be able to book again.

Only for those candidate who has to apply for both part-A and part-B
Registration for Part-B:
Step 1: Once the candidate clears all the papers of Part-A, he can apply for the Part-B by clicking the link provided on home page as shown below:

Step 2: When the link is clicked, a confirmation popup will be displayed as shown below. Click on “Yes” to apply for Part-B.

Email id for e-Pariksha helpline-epariksha.helpline@gmail.com

Comments

Difference Between A, B & C-Class Divisions?

IMO Symbol A Class Division IMO Symbol B Class Division SOLAS has tables for structural fire protection requirement of bulkheads and decks. The requirements depend on the spaces in question and are different for passenger ships and cargo ships. The Administration has required a test of a prototype bulkhead or deck in accordance with the Fire Test Procedures Code to ensure that it meets the above requirements for integrity and temperature rise. Types of Divisions: "A" Class "B" Class "C" Class "A" Class: "A" class divisions are those divisions formed by bulkheads and decks which comply with the following criteria: They are constructed of steel or equivalent material They are suitably stiffened They are constructed as to be capable of preventing the passage of smoke and flame to the end of the one-hour standard fire test. they are insulated with approved non-combustible materials such that the average tempera...

Bilge Injection Valve

Bilge Injection is a valve that enables the engine room bilges to be pumped out directly overboard in the event of an emergency such as flooding. The valve is normally fitted to the end of a branch connection with the main sea water suction line. This enables large main seawater cooling pumps to be used as a bilge pump in an emergency. Emergencies like fire and flooding involve the use of seawater. If there is a fire, seawater is the biggest resource of water available in the sea. Similarly, if it involves flooding of the engine room, cargo spaces or any other place on the ship for that matter; you would again require pumping the sea water out of the ship. In both these cases, you require pumps. There are two valves in close proximity namely main injection valve and bilge injection valve. Both of them have their own independent controls. The diameter of the bilge injection valve is kept nearly 66% of the main valve diameter which draws water directly from the sea th...

Load Line & Why it is Important

Merchant ships have a marking on their hull know as the Plimsoll line or the Plimsoll mark, which indicates the limit until which ships can be loaded with enough cargo, internationally, the Plimsoll line on a ship is officially referred to as the international load line. Every type of ship has a different level of floating and the Plimsoll line on a ship generally varies from one vessel to another. All vessels of 24 meters and more are required to have this Load line marking at the centre position of the length of summer load water line. There are two types of Load line markings:- Standard Load Line marking – This is applicable to all types of vessels. Timber Load Line Markings – This is applicable to vessels carrying timber cargo. These marks shall be punched on the surface of the hull making it visible even if the ship side paint fades out. The marks shall again be painted with white or yellow colour on a dark background/black on a light background. ...

Marine Engineering

Search This Blog